Why NC lacquer fails on iron
NC is the default clear coat in most furniture workshops, so it gets reached for on metal too. It is the wrong choice twice over.
NC, acrylic or PU: choosing the right clear coat
Three systems, three jobs. Picking the wrong one is one of the more expensive mistakes in furniture finishing, and it usually only shows up months later.
Choosing wood for export furniture: a practical guide to six timbers
When choosing wood for furniture it is not just about looks. Strength, durability and workability matter too, and each timber behaves differently under a finish.
Eight coating defects, and what each one is telling you
Even the best coating will fail if it is applied in the wrong conditions. The good news is that these defects are diagnosable, and almost all of them are avoidable.
Acacia turns red after it leaves you. Here is the chemistry, and the fix.
Freshly finished acacia gradually shifts reddish or darker as its natural tannins oxidise. The furniture you approved and the furniture your customer unpacks are not the same colour.
Why mango wood gets rejected at inspection, and how to stop it
Mango wood carries natural yellow and black spotting. It is a property of the timber, not a fault in your workmanship, but a buyer inspecting a container does not draw that distinction.
Jobs
R&D Chemist
Develop and test wood and metal coatings in our lab, with a focus on custom formulation and performance improvement.
Jobs
Business Development Manager
Build client relationships, offer coating solutions, and guide colour matching and finish development for export furniture units.